Unlocking The New Era
4 Access Solutions
Access Card | Pin Number | Key | Remote Control
Smart touch pad prevents password being exposed due to residual fingerprints
Automatic lock mode after door is closed
Low battery warning with alarm and LED indicator
Suitable for door thickness between 3.5 - 6.0cm
6 - 12 digit pin codes
FOC remote control: 1 set, mechanical keys: 2 sets, cards: 4 sets
2 years warranty against manufacturer's defect
Access card - $8
Remote 1: big transmitter + receiver - $150
Remote 2: small transmitter + receiver - $120
Big transmitter -
Small transmitter -
Model : YDD 323GN
For metal gate
Frequently Asked Questions
What batteries should be used for the digital locks?
Normally 4 AA size batteries are used for the locks. We recommend to use alkaline batteries like Energizer or Duracell or re-chargeable batteries.
How will I know if the batteries are 'low batt'?
There will be a LED indicator shown on the screen of the lock indicating low battery and also the 'unlocking melody' of the lock will be different from the usual melody.
What if I forget to change the batteries and the power is totally flat?
1) When you are inside the house, there will be a manual over-ride knob to unlock the door.
2) When you are outside of the house, you will need to buy a 9V battery and place it to the pinout at the lock to charge it temporarily to activate the lock so you can key in your pin number to enter the house.
What happens if I lose 1 of the RFID card for my digital lock?
Normally we give 4 pcs of RFID card for every digital lock. If you lose 1 of them, you will need to take the remaining 3 cards and re-program it with your lock, the lost card which is not newly programmed will be ineffective.
If I have a RFID metal gate lock and a RFID wooden door lock, can I unlock both locks with just 1 card?
Yes, it is possible.
How long is the warranty period?
The warranty period is 2 years against manufacturer's defect.